Mounting The Appliance; Dimensions - RBI Infinite Energy2 IW199 Installation And Operation Instructions Manual

6 - INSTALLATION - Mounting the appliance
Figure 6-3 - Bracket to lift the appliance
Figure 6-4 - Correct way to lift the appliance
A
Figure 6-5 - Install leveling feet
A A
020021.01.009
B
MIN
1 m
A
020021.01.010
020010.01.013
A
B
MIN 0
MAX 0,39 " (10 mm)
020010_01_030
39
6.2 - Mounting the
appliance
1.- Remove the outer shipping carton
from the appliance;
2.- Remove the front door (see
Section 16.2) to access the screw
"C" (Figure 6-1) in front of the unit;
3.- Remove the screw "D" in the rear
of the unit (Figure 6-2);
4.- Access to the uplift brackett "A"
(Figure 6-3) on the upper side of
the appliance (see Figure 6-3);
5.- Using a proper equipment (check
the weight of the unit in Section
17), and lift the unit from the wood
pallet and move it to the installation
location;
6.- Install the leveling feet and plumb
the unit accordingly (see Figure
6-5).
WARNING!!!
The floor
must be capable of supporting
the weight (see Section 17)
of the unit or the same unit
and building may be damaged
causing severe personal injury,
death, or substantial property
damage.

6.3 - Dimensions

Figures from 6-6 and 6-7 list all
dimensions of each appliance model.
B = blocking nut