Factory Menu - RBI Infinite Energy2 IW199 Installation And Operation Instructions Manual

20 - FACTORY MENU

WARNING!!!
Changing
these parameters could cause
the appliance and the system
to malfunction. For this reason,
only a qualified technician who
has in-depth knowledge of the
appliance should change them.
Failure to comply with this
warning can cause extensive
property damage, severe
personal injury or death!
WARNING!!!
Pay attention
when entering the Factory
Menu, changes may cause the
unit to start. Failure to comply
with this warning can cause
extensive property damage,
severe personal injury or
death!
CAUTION!!!
On multiburner
units (399 up to 1000) display
is always connected to the
Burner 1 (Master). To change
parameters to the other
burners you have to move
the display connection as per
Section 16.7.
151
The appliance's micro-processor
makes this menu of parameters
available to the qualified technician for
the setting of the appliance.
To enter this menu operate as follow:
1.- Turn the main electrical supply Off;
2.- Press and hold, in the same time,
RESET key and
3.- Keeping the before mentioned
button pressed, turn the power on;
4.- Wait until the word "init" is
displayed or until display start to
show the 3000 parameters;
5.- Leave before the RESET button
and after the
6.- Parameters 3000 start to be
displayed;
7.- Press and release
buttons to scroll through
the list of the parameters;
8.- Once the parameter has been
selected, it can be changed
pressing the RESET button (value
start to blinking) and using the
and keys you can
change the value;
9.- Press RESET key to save the
change;
10.- Wait 10 seconds;
11.- Turn the main electrical supply
Off;
12.- Turn the main electrical supply
On to leave the Factory menu.
key;
key;
and