Table of Contents
Advertisement
6.4.3
Alarm processing function category
Siemens Building Technologies
Fire Safety & Security Products
Cycle stop
This function stops an automatic picture cycle on any monitor or a programmed
monitor.
Stop
Stopping an image sequence on any monitor
Enter the number of the desired video output at the keyboard using the digit
keys, then press the key that has been allocated this function.
The scroll bar in the display window must be set to its initial position.
Stop x
Stopping an image sequence on a programmed monitor
Program the video output using the scroll bar in the display window. The
sequence can be stopped at the keyboard at the press of a button.
You can also use this function to stop a preset sequence (see section 8.2).
Fig. 35
Alarm processing
Alarm reset
This function allows displayed alarm images to be deleted.
Reset
Deleting all alarm images in the system
The scroll bar in the display window must be set to its initial position.
Res.x
Deleting an alarm image on a set monitor
Program the video output using the scroll bar in the display window. Alarm
image generation can be stopped at the keyboard at the press of a button.
Deleting switched alarm images by entering the appropriate monitor number:
1.
Enter the monitor number using the digit keys
2.
Execute the MON function
– or –
press a programmed MONx key
Programming keyboards
47
06.2008
Advertisement
Table of Contents
