Table of Contents
Advertisement
Ports on the video matrix
96
Siemens Building Technologies
Fire Safety & Security Products
The following standard parameter settings apply for the COM1...4 index card (fields
in white boxes):
If an IVM or external computer is connected via COM2, COM2 must selected in
menu option 'Local control via:.
Fig. 68
TELEMAT MD/MTD connection register COM1...4 control
The following standard parameter settings apply for the TELEMAT/SISTORE-
NT/LMS index card (fields in white boxes):
Fig. 69
TELEMAT connection - TELEMAT/ SISTORE-NT/LMS register
TELEMAT is reset, when system starts:
Select the checkbox if TELEMAT should also be reset when a system reset takes
place.
COM2 with IVM TELEMAT control
Select the checkbox if a PC for setting TELEMAT parameters (e.g. IVM) is
06.2008
Advertisement
Table of Contents
