Table of Contents
Advertisement
11
Selecting an alarm line/camera group
11.1
Alarm line/camera group x
Siemens Building Technologies
Fire Safety & Security Products
This dialogue screen allows you to enter parameters for an individual alarm line
and/or camera group. A specific camera group can be set for each alarm line. If set
to do so in the Setting alarm image switching mode on output x dialogue
screen, this camera group will switch to monitor when an alarm event takes place
(see section 12.2.2).
The camera group defined here (see section 11.1) can also be switched manually and totally
independently of an alarm, if group switching has been enabled in the manual switching field in the
Setting video mode switching parameters for monitor x dialogue screen (see section 15.1.2).
Fig. 55
Alarm lines /camera group
Use the Alarm lines /camera groups button and then click a number button to open
the Alarm line/camera group dialogue screen (see section 11.1).
This dialogue screen allows you to set parameters for an alarm line and/or camera
group. Each alarm line can be permanently allocated to a camera group (max. 4
cameras). If set to do so, these cameras will be switched in the event of an alarm.
Selecting an alarm line/camera group
73
06.2008
Advertisement
Table of Contents
