6.8 USB/Loading
Via this port, USB2.0 can be used to connect the force gauge to a PC computer for
data processing.
The Ni-MH battery can also be charged via this connection. To do this, connect the
mains adapter.
Fig 4-1
6.9 Multifunctional port
The PIN assignment is shown in the table.
Pin
Description
1
TX (RS232)
2
RX (RS232)
3
GND (RS232)
4
Default value output B
5
6
Default value output C (general)
7
Default value output A
8
6.9.1 RS-232
The RS232 interface is only used to connect a mini-printer to print out the data
received.
RS-232 specification:
- Hardware flow control:
- Word length:
- Stop bit:
- Parity:
- Data transmission rate:
10
none
8 bits
1 bit
none
38400
FC-BA-e-2020