Ember Bed Glass And Ember Material Installation; Ember Bed Glass Installation - Lopi ProBuilder 24 CleanFace GSR2 Installation Manual

54

Ember bed Glass and Ember Material Installation

Ember bed Glass Installation

The Ember-Glo™ lights come standard on the GSR2 units. Make sure the ember skirt is in place. The skirt hooks over
the front of the ember platform and slopes outward toward the glass. The skirt helps keep the glass and ember material
from falling off the platform when the glass is removed.

Locate the perforations in front of the log grate.

Place a thick layer of the ember glass over the perforations making sure to cover all of the holes completely.

Lightly dress the ember glass with the black touch-up paint provided. Check the appearance with the lights on
and add additional paint, as needed, for a realistic glowing ember appearance.
NOTE: If power is supplied to the fireplace it can helpful to turn the lights on while painting so you can determine an
appropriate amount of paint for a realistic ember appearance.
NOTE: We recommend that you use a piece of paper, cardboard as a shield to mask the log grate and burner from
overspray (see below).
© Travis Industries
Installation
(for qualified installers only)
12/17/20 - 1528 PB24 CF Install (AUST)