Mantel Requirements; Mantel Column Clearances - Lopi ProBuilder 24 CleanFace GSR2 Installation Manual

Mantel Requirements


Use the table below to determine the maximum mantel depth allowed. The mantel depth (measured
from the non-combustible facing) must fall within the shaded portion of the table.

Any material above the fireplace that protrudes more than 3/4" (19mm) from the non-combustible
facing is considered a mantel and must meet the mantel requirements.
47" (1194mm)
46" (1169mm)
45" (1143mm)
Mantel
44" (1118mm)
Height
43" (1093mm)
Above
42" (1067mm)
41" (1042mm)
Base (a)
40" (1016mm)
39" (991mm)
38" (966mm)
37" (941mm)
36" (916mm)
35" (890mm)

Mantel Column Clearances


Combustible mantel columns (legs) require a 0" (0mm) clearance to the side of the fireplace (they
must be to the side of the fireplace).

Non-combustible mantel columns do not have a minimum clearance.
© Travis Industries
Installation
(for qualified installers only)
Maximum Mantel Depth (b)
b
a
12/17/20 - 1528
39
PB24 CF Install (AUST)