Table of Contents
Advertisement
46
Barrier Screen Visual Deflector Adjustment
The barrier screen assembly has an adjustable visual deflector along the lower edge. If the assembly is
adjusted to accommodate thick facing material, adjust the deflector, as shown below, to block the view of
the valve area.
1. Place the screen assembly face down on a soft surface to protect it from scratching. Locate the
nuts along the bottom edge of the deflector (in this example there are 3, your fireplace may have
more).
2. Remove the nuts using an 11/32" nut driver. Move the deflector to the desired position and
reinstall the kept nuts. Test fit the assembly to the fireplace and make any adjustments as
needed.
© Travis Industries
Installation
(for qualified installers only)
12/17/20 - 1528
PB24 CF Install (AUST)
Advertisement
Table of Contents
