Óleo Lubrificante E Filtro / Aceite Lubricante Y Filtro / Lubricating Oil And Filter - Navistar MWM Acteon Operation And Maintenance Manual

Table of Contents

Advertisement

Óleo Lubrificante e Filtro
Intervalo de Serviço: Verificar na tabela
de manutenção deste manual.
Drenar o óleo com o motor na tempera-
tura normal de operação, retirando-se o
bujão, arruela e o filtro de óleo.
Esperar até parar de sair óleo. Recolocar
o bujão com uma nova arruela.
Limpar a área de vedação do cabeçote
do filtro com um pano sem fiapos e limpo.
Lubrificar levemente a junta do filtro.
Rosquear o filtro manualmente até o
encosto. Apertar novamente mais meia
volta.
Usar sempre filtro de óleo genuíno.
Com o motor nivelado, abasteça com
óleo novo. O nível deve alcançar a marca
superior da vareta, sem ultrapassá-la.
Usar óleo lubrificante que atenda as
especificações recomendadas pelo
fabricante.
9.610.0.006.8790
Aceite Lubricante y Filtro
Intervalo de Servicio: Verificar en la
tabla de mantenimiento de esto manual.
Drenar el aceite con el motor en la
temperatura normal de operación, qui-
tándose el tapón, arandela de sellado y
el filtro de aceite.
Esperar hasta que pare de salir acei-
te. Recolocar el tapón con una nueva
arandela.
Limpiar el área de sellado del cabezal
del filtro con un trapo sin hilas y limpio.
Lubricar levemente la junta del filtro.
Instalar el filtro manualmente hasta que
se asiente. Apretar nuevamente por más
media vuelta.
Usar siempre filtro de aceite genuino.
Con el motor nivelado, llene con aceite
nuevo. El nivel debe alcanzar la marca
superior de la varilla, sin excederla.
Usar aceite lubricante que atienda las
especificaciones recomendadas por el
fabricante.
Lubricating Oil and Filter
Service interval: Check the maintenance
schedule on this manual.
Drain oil with the engine at normal
operating temperature, by removing the
drain plug, washer and oil filter.
Wait until the oil stops dripping. Replace
the drain plug using a new washer.
Clean the sealing area of the filter head
with a clean, lint-free cloth.
Lightly lubricate the filter gasket with
engine oil.
Thread the filter by hand until it seats.
Tighten it an additional half turn.
Use always a genuine oil filter.
With the engine leveled, add new oil.
The level should reach the upper mark
on the gauge, without exceeding it.
Use a lubricating oil that meets the
specifications recommended by the
manufacturer.
85

Advertisement

Table of Contents
loading

Table of Contents