Siemens SINAMICS S120 System Manual page 156

DC link adapter
10.6 Electrical connection
5. Tighten the screw of the hose clamp using a suit‐
able screwdriver.
Note
After installing the cables, ensure that the EMC tongues of the DC link adapter are in contact with
the side panel of the component.
154
6. Fix the second conductor of the DC link connect‐
ing cable to the profile rail using a cable clamp.
Connect the cable for the DCP connection as de‐
scribed under Points 2 to 5.
The installed DC link connecting cable is shown in
the adjacent diagram.
System Manual, 10/2020, 6SL3097-5AH10-0BP0
High Frequency Drive