Siemens SINAMICS S120 System Manual page 67

Figure 5-10
Mounting on the mounting plate
1. Individually mount the HF Modules one after the other on the mounting plate. Start with the
left-hand component. First mount all of the modules of the DC link and the 24 V busbars
before connecting them up.
2. Before mounting, insert the screws and washers into the mounting plate from the rear as
shown below.
High Frequency Drive
System Manual, 10/2020, 6SL3097-5AH10-0BP0
Drilling pattern for the High Frequency Drive without Active Line Module booksize, all data
in mm and (inches)
High Frequency Modules
5.5 Installation
65