Siemens SINAMICS S120 System Manual page 155

Table 10-3
1. Fix the first conductor of the DC link connecting
cable to the profile rail using a cable clamp.
3. Slide the cable clamp onto the tongue, and then
insert the end of the cable into the DCN connection
of the DC link adapter.
High Frequency Drive
System Manual, 10/2020, 6SL3097-5AH10-0BP0
Connecting the DC link connecting cables to the DC link adapter
10.6 Electrical connection
2. Route the cable end through an appropriate ca‐
ble clamp.
4. Tighten the cable using an Allen key.
DC link adapter
153