Siemens SINAMICS S120 System Manual page 17

• Directive 2011/65/EU
SINAMICS S devices comply with the requirements of Directive 2011/65/EU on the restriction
of the use of certain hazardous substances in electrical and electronic devices (RoHS II).
• European EMC Directive
SINAMICS S devices comply with the EMC Directive 2014/30/EU.
• EMC requirements for South Korea
SINAMICS S devices with the KC marking on the type plate satisfy the EMC requirements for
South Korea.
• Eurasian conformity
SINAMICS S comply with the requirements of the Russia/Belarus/Kazakhstan customs union
(EAC).
• North American market
SINAMICS S devices provided with one of the test symbols displayed fulfill the requirements
stipulated for the North American market as a component of drive applications.
You can find the relevant certificates on the Internet pages of the certifier
iq.ulprospector.com).
• Specification for semiconductor process equipment voltage drop immunity
SINAMICS S devices meet the requirements of standard SEMI F47-0706.
• Australia and New Zealand (RCM formerly C-Tick)
SINAMICS S devices showing the test symbols fulfill the EMC requirements for Australia and
New Zealand.
• Quality systems
Siemens AG employs a quality management system that meets the requirements of ISO 9001
and ISO 14001.
Not relevant standards
China Compulsory Certification
SINAMICS S devices do not fall in the area of validity of the China Compulsory Certification (CCC).
EMC limit values in South Korea
The EMC limit values to be observed for Korea correspond to the limit values of the EMC product
standard for variable-speed electric drives EN 61800-3 of category C2 or the limit value class A,
Group 1 to KN11. By implementing appropriate additional measures, the limit values according
to category C2 or limit value class A, Group 1, are observed. Further, additional measures may
be required, such as using an additional radio interference suppression filter (EMC filter).
The measures for EMC-compliant design of the system are described in detail in this manual
respectively in the EMC Installation Guideline Configuration Manual.
High Frequency Drive
System Manual, 10/2020, 6SL3097-5AH10-0BP0
1.6 Directives, standards, certificates
(https://
Introduction
15