Siemens SINAMICS S120 System Manual page 169

Figure 11-5
Topology display
In order to show the HF line-up in the target topology that has been read out, at the user
interface in the "Startup" operating area, change to
"Drive system" > "Drive unit" > "Topology". The High Frequency drive is displayed in the
"Topology" window with its three individual modules, each of which has its own assigned
component number.
Note
HF Sine Filter Module
The HF Sine Filter Module is only displayed if the DRIVE-CLiQ filter function is deactivated in the
display options.
High Frequency Drive
System Manual, 10/2020, 6SL3097-5AH10-0BP0
High Frequency Drive in the configuration view
11.3 Commissioning with SINUMERIK Operate
Configuring
167