Configuring
10.2 Preconditions for commissioning
10.2.3
DRIVE-CLiQ topology at the High Frequency Drive
The diagrams show how the DRIVE-CLiQ cables between HF Motor Module,
HF Choke Module and HF Damping Module must be connected to ensure an error-free
function.
NOTICE
Damage when using incorrect DRIVE-CLiQ cables
Damage or malfunctions can occur on the devices or system when DRIVE-CLiQ cables are
used that are either incorrect or have not been approved for this purpose.
• Only use suitable DRIVE-CLiQ cables that have been approved by Siemens for the
High Frequency Drive with 16 kHz
Figure 10-1
156
particular application.
DRIVE-CLiQ topology at the High Frequency Drive (16 kHz)
System Manual, (SH2), 04/2015, 6SL3097-4AH10-0BP3
High Frequency Drive