Technical Specifications; Replacing The Battery; Guarantee; Www.microlife.com - Microlife IR 1DB1 Instruction Manual

11. Technical Specifications

Type:
Measuring Range:
Accuracy:
Display:
Accoustic:
Memory:
Nite Glow:
Operating temperature:
Storage/transport temp.:
Automatic Switch-off:
Battery:
Dimensions:
Weight:
Standards:
According to the Medical Product User Act a biennial technical inspection is recommenden for profes-
sional users. Please observe the applicable disposal regulations.

12. Replacing the Battery

This thermometer is supplied with one lithium battery,
type CR2032. Replace with a new CR2032 battery when
the flashing battery symbol appears on the LCD display.

13. Guarantee

Subject to the following conditions this high-quality measuring instrument is covered by a 2 year guar-
antee from the date of purchase. Warranty claims must be lodged within the guarantee period.
This product was manufactured with the utmost of care according to international quality standards.
Should you have reason for complaints despite this, please send the instrument, accompanied by the
completed Guarantee Card with dealer's stamp as well as original proof of purchase directly or through
your medical supplier to your closest Microlife Distributor.
Damage resulting from incorrect use is not covered by the guarantee. Battery and packaging are exclud-
ed from the guarantee. Claims beyond this, including claims for damages, are excluded.
Name and adress of responsible dealer:

14. www.microlife.com

Detailed user information about our thermometers and blood pressure monitors as well as services can
be found at www.microlife.com.
Digital Infrared Thermometer IR 1DB1
0 °C to 100.0 °C (32.0 °F to 212.0 °F)
Laboratory: ±0.2 °C, 32.0 ~ 42.2 °C
(±0.4 °F, 89.6 ~ 108.0 °F)
±1 °C, 0 ~ 31.9°C, 42.3 ~ 100.0 °C
(±2 °F, 32.0 ~ 89.5 °F, 108.1~ 212.0 °F)
Liquid Cristal Display with indicating unit 0.1 °C (0.1 °F)
a. The unit is turned ON and ready for the measurement: 1 short «bi» sound.
b. Complete the measurement: 1 long beep sound.
c. System error or malfunction: 3 short «bi» sounds.
Auto-Display the last measured temperature
a. The display will be lighted for 4 seconds when the unit is turned ON.
b. The display will be lighted again for 5 seconds when the measurement
has been completed.
10 °C to 40 °C (50 °F to 104 °F)
-25 °C to +55 °C (-13 °F to 131 °F)
Approx. 1 minute after last measurement has been taken.
CR2032 BATTERY (X1) - at least 1000 measurements
128 mm (L) x 48 mm (W) x 30 mm (H)
52 g (with battery), 48 g (without battery)
Complies with EN12470-5 and ASTM E-1965 requirements
8