Maintenance And Upkeep; Maintenance Plan - Deprag MINIMAT-EC 320E22-00120 Operating Instruction Booklet

9

Maintenance and Upkeep

WARNING
Assembly and maintenance work may only be carried out by service
personnel of the company DEPRAG.
Incorrect assembly or maintenance work could create hazards for the op-
erator and cause damage to the EC-screwdriver.
WARNING
Potential loss of life due to electric shock!
Disconnect screwdriver spindle from power supply before performing main-
tenance and repair work!
The maintenance of the EC-screwdriver may only be carried out by DEPRAG service per-
sonnel.
The maintenance covers all disassembly and inspection of all mechanical parts as well as
the cleaning and re-greasing of all moveable parts (gear, drive).
After each maintenance check the shut-off accuracy and if necessary re-calibrate.
For this reason it is advisable to carry out maintenance work and re-calibrations of the
screwdriver at regular intervals.

9.1. Maintenance Plan

IMPORTANT
Adapt the maintenance work depending on the condition of the machine
and amount of wear in each individual case.
No. Work to be carried out
1. Check machine for external
damage
2. Check inserting tool for wear
and tear and if it is
undamaged
For further maintenance and repair work, send the machine to DEPRAG.
Cycles
Before starting work
Before starting work
19
Notes
Replace worn or damaged
cables and parts.
Replace worn or damaged
inserting tools
immediately.