Specifications Of Encoder Output Signal - FujiFilm UA107x8.4BESM-T35K Operating Manual

１２. SPECIFICATIONS OF ENCODER OUTPUT SIGNAL
1. Connector
ヒロセ HR25-9R-20S
2. Pin Assignment of Connector
See following table.
Pin
Number
1 N.C.
2 GND ( Digital )
3 N.C.
4 +5V (Zo Output Impedance : 1k Ω )
5 N.C.
6 N.C.
7 N.C.
8
Iris Encoder
9
10 Zoom Position
11 Stabilizer ON/OFF Signal
12 Zoom Encoder
13 Focus Position
14 Extender Signal
15 Reference Voltage
16
Zoom Encoder
17
18
Focus Encoder
19
20 Signal GND ( Analog )
3. Waveforms of Output Signals
(1) Waveforms of Focus Encoder Output Signals
(when focus moves from inf. side toward MOD side)
(2) Waveforms of Zoom Encoder Output Signals
(when zoom moves from wide side toward tele side)
(3) Waveforms of Iris Encoder Output Signals
(when iris moves from closed side toward open side)
4. Resolution
FOCUS
ZOOM
IRIS
Phase A (H 5V / L : 0V)
Phase B (H 5V / L : 0V)
( Ｗｉｄｅ : 2 V / Ｔｅｌｅ : 7 V)
(ON : H = Open 、 OFF : L = 0V)
Phase Z (H 5V / L : 0V)
(Near : 2 V / Far : 7 V)
( × 1 : Open / × 2 : L = 0V) Open collector output.
5.0 Ｖ
Phase A (H 5V / L : 0V)
Phase B (H 5V / L : 0V)
Phase A (H 5V / L : 0V)
Phase B (H 5V / L : 0V)
Resolution
16 bits
16 bits
10 bits
Signal
Phase A
Phase B
Phase A
Phase B
Phase Z
* The position of phase Z is not regulated to that of phase A or B.
Phase A
Phase B
- 16 -
Time
Time
Time