Extender Selection; Macro Operation - FujiFilm UA107x8.4BESM-T35K Operating Manual

7.4 EXTENDER SELECTION

There are two methods of extender selection: "Manual Selection" using the extender select knob on the lens
and "Selection by Accessory" using an optional accessory.
7.4.1 Manual Selection
a. Set the extender remote/manual select switch on the lens (viewed from front glass side of lens) to "MANU."
b. Rotate the extender select knob on the lens to select the extender.
7.4.2 Selection by Accessory
The extender can be selected by means of a range selector or an accessory that has an extender selection switch.
a. Set the extender remote/manual select switch on the lens to "REMO."
b. Select the extender by means of an accessory linked with the lens. For operating instruction of an accessory,
refer to the operation manual of the accessory.
7.5

MACRO OPERATION

The macro operation (taking close shot) can be done by means of either a zoom control unit (zoom rate demand
unit, etc.) or a remote macro control unit (EA-3A-10A, 11A, etc).
7.5.1 Operation by Zoom Control Unit
a. Set the macro ON/OFF select switch on the lens to "ON."
b. Bring the focus to the M.O.D. position, by means of a focus control unit (focus position demand unit, etc.).
c. Focus on the object by means of a zoom control unit.
7.5.2 Operation by Remote Macro Control Unit
a. Move the zoom near the wide end using a zoom control unit (zoom rate demand unit, etc.). Also, bring the
focus to the M.O.D. position using a focus control unit (focus position demand unit, etc.).
b. Set the remote macro function to "ON" using a remote macro control unit.
c. Focus on the object by operating the position setting knob of the remote macro control unit.
Note1. To perform the macro operation using a remote macro control unit, set the macro ON/OFF select
switch on the lens to "OFF."
Note2. For the operation method of each operation unit, refer to the respective operation manual of each
device.
-  -