Manual Activation / Deactivation; Active Speed Limiter - If Equipped - Jeep COMPASS User Manual

170 STARTING AND OPERATING
Stop/Start OFF switch is pushed.

A Stop/Start system error occurs.

Vehicle is in 4WD Low transfer case mode.

Conditions That Force An Application Of The
Electric Park Brake While In Autostop Mode:
The driver's door is open and brake pedal

released.
The driver's door is open and the driver's seat

belt is unbuckled.
The engine hood has been opened.

A Stop/Start system error occurs.

If the Electric Park Brake (EPB) is applied with
the engine off, the engine may require a manual
restart and the EPB may require a manual
release (press brake pedal and push the EPB
switch) Ú page 98.
M A / D
ANUAL CTIVATION EACTIVATION
To activate/deactivate the system manually,
push the button on the instrument panel.
LED off: system activated

LED on: system deactivated

STOP/START OFF Switch
ACTIVE SPEED LIMITER — IF EQUIPPED
The Active Speed Limiter button is positioned
on the right side of the steering wheel.
Active Speed Limiter Button
This feature allows you to program the
maximum speed of travel for your vehicle.
NOTE:
The Active Speed Limiter can be set with the
vehicle stationary or in motion.