Traffic Sign Assist System; If Equipped; Activation/Deactivation; Traffic Sign Assist Modes - Jeep GRAND CHEROKEE 2022 Owner's Manual

152 STARTING AND OPERATING
STATIONARY OBJECTS AND VEHICLES
ACC does not react to stationary objects or vehicles.
For example, ACC will not react in situations where
the vehicle you are following exits your lane and the
vehicle ahead is stopped in your lane. It will consider
this stopped vehicle a stationary object as it did not
previously detect movement from it. Always be
attentive and ready to apply the brakes if necessary.
Stationary Object And Stationary Vehicle Example
TRAFFIC SIGN ASSIST SYSTEM —

IF EQUIPPED

The Traffic Sign Assist (TSA) system uses a camera
mounted on the windshield, as well as map data
when the vehicle is equipped with Navigation, to
detect recognizable road signs such as:
Speed limits

School zones

No passing zones

NOTE:
The TSA system will automatically display the

detected road sign using the unit of measure-
ment (mph or km/h) selected within the instru-
ment cluster display.
If no speed limit signs are detected, the system

will revert to the speed limit signs that are
stored in the Navigation system.
The system always checks the traffic signs indi-

cating the current speed limit. The system is
able to recognize and display up to two different
road signs in the instrument cluster display.
These road signs can be found on the Driver
Assist page.
A /D
CTIVATION EACTIVATION
The TSA System can be enabled/disabled within
the Uconnect system through the Safety/Driver
Assistance menu. System ON is signaled by road
signs shown on the instrument cluster display.
NOTE:
Even if the system is OFF, the speed limit sign will
be displayed when the driver selects it on the
HOME screen.
T S A M
RAFFIC IGN SSIST ODES
TSA has three selectable modes of operation that are
available through the Uconnect system Ú page 203.
Visual
When Visual is selected, the system will alert the
driver when the current speed of the vehicle
exceeds the detected speed limit by showing a
graphic in the instrument cluster display.
Visual + Chime
When Visual + Chime is selected, the system will alert
the driver when the current speed of the vehicle
exceeds the detected speed limit by showing a graphic
in the instrument cluster display, and by sounding an
audible alert. The audible alert will last for 10 seconds,
and the visual alert will remain on as long as the vehicle
is exceeding the speed limit.