Section Through Windscreen And Fixing Clips; 'Solbit' Retainer In Position - Lotus Esprit Series Workshop Manual

Secure the clips with a
head of the rivet with o smear of seolont.
0.75
3. i n
periphery of the screen and the body aperture.
-
16

Section through windscreen and fixing clips

Fig
4.
Strip the ends of the 'Solbit' sealing/retaining medium to expose
approximately
the exposed ends to a variable current transformer (or two
batteries), and apply approximately
surface i s tacky. Disconnect 'Solbit' from transformer.
-
17
Fig.
5. Starting at a lower corner of the aperture, apply the 'Solbit' to the
primed body flange. The 'Solbit' must be positioned over the flat
0.125 (3.17
i n
(20
mm) wide band of 'Solbit' primer round the
12
(.5
mm in) of the internal heating wire. Connect
mm) pop-rivet, then seal the
Glass
I
24
volts to the 'Solbit' until the
BODY
12V
ESPRIT