THROTTLE CABLE
To Remove
Disconnect the inner cable from its lever on the carburetters.
1.
.Disconnect the outer cable from its bracket on camshaft cover.
2 .
Disconnect the inner cable from the accelerator pedal.
3.
inner cable from the clevis.)
Before pulling out the cable see 'To Re
4.
To Replace
To replace the cable, first attach the new cable to the old and then ~ u l l
1.
through under the carpet.
Attach the clevis a t the end of the cable using the pin to the throttle pedal.
2.
Fig.
Adjust the inner cable a t the carburetters to give the correct free play
3.
(see below) between the inner cable and lever on the carburetters.
Pedal A*juster
17
Throttle (accelerator) pedal setting
FUEL SYSTEM
(Relwse the
1
p
lace
.
Page
L37
Ensure
ESPRIT
04/78