Table of Contents
Advertisement
3
The vacuum cleaner
directs to the
charging base before
expiration of the
cleaning program.
#
Problem
4
The vacuum cleaner
does not perform a
scheduled work.
5.
The vacuum cleaner
cannot be run from
the control unit (its
reach counts 5
meters).
Attention! If it is impossible to resolve the problem on your own using the steps described above, please
contact your POLARIS Authorized Service Center.
STORAGE
Electric devices shall be stored in a dry and clean room at an ambient temperature of up to 40ºC under
relative humidity of 70% provided the absence of any ambient dust, acidic or other fumes which can
adversely influence on electric device materials.
Keep the device out of the reach of children.
TRANSPORTATION
Electric devices can be transported by means of any kind of transport as per cargo carriage rules applicable
to an involved kind of transport. The device shall be transported in its original package.
The device transportation method shall exclude potential ingress of atmospheric precipitations and
aggressive agents.
Attention! Upon the device lifespan expiration, do not discard it together with household wastes. Return it
to a special collection point for recycling. Thus, you will help to save the environment.
SALE
No prescribed sale rules.
The vacuum cleaner directs to the
base at a low level of charge.
Power consumption rate differs
depending on the type of
vacuumed surfaces.
Possible reason
The vacuum cleaner is de-
energized.
The vacuum cleaner is discharged.
The dust bag is completely full.
Electric battery of the remote
control unit is completely
discharged
The vacuum cleaner is de-
energized / its electric battery is
completely discharged.
The remote control unit emitter is
contaminated
The presence of noises from other
IR-radiation sources.
29
Charge the vacuum cleaner.
The time of autonomous
operation of the vacuum cleaner
depends complexity of a
vacuumed room, on the amount
of debris, and on the vacuuming
mode.
Recommended actions
- Turn on the vacuum cleaner.
- While the vacuum cleaner is
under the standby mode, make
sure that it is fully charged and
has got enough energy to
operate.
- Clean the dust bag
- Replace electric batteries
- Turn on / charge the vacuum
cleaner.
- Wipe the remote control unit
emitter with a piece of soft cloth.
Keep the control unit away from
other IR-radiation sources.
Advertisement
Table of Contents
