Installing And Removing Drives; Installing Drives In Drive Cage Type A; Installation Conditions For Drives In Drive Cage Type A - Siemens SIMATIC IPC547J Operating Instructions Manual

6.6

Installing and removing drives

6.6.1

Installing drives in drive cage type A

6.6.1.1

Installation conditions for drives in drive cage type A

Number of drives per system and their mounting locations
You can install up to six drives at the following bays in the drive cage type A and on the side
panel of the device.
Note the numbering of the mounting locations in the drive cage type A. (Page 18)
Number of drives Mounting location in drive
per system
1 Drive cage type A:
•
2 Drive cage type A:
•
•
3 Drive cage type A:
•
•
•
4 Drive cage type A:
•
•
•
Drive cage type A:
•
5 Drive cage type A:
•
•
•
•
1 x internal in the device
Operating Instructions, 01/2021, A5E43920357-AA
cage type A
Mounting location 0
Mounting location 0
Mounting location 1
Mounting location 0
Mounting location 1
Mounting location 2
Mounting location 0
Mounting location 1
Mounting location 2
Mounting location 3
Mounting location 0
Mounting location 1
Mounting location 2
Mounting location 3
Expanding and assigning parameters to the device
• 2.5" drive or 3.5" drive in removable tray (Page 107)
• 2.5" drive or 3.5" drive in removable tray (Page 107)
• 2.5" drive or 3.5" drive in removable tray (Page 107)
• 2.5" drive or 3.5" drive in removable tray (Page 107)
• 2.5" drive or 3.5" drive in removable tray (with 5.25" mounting
frame) (Page 109)
• 5.25" drive or 5.25" component (Page 121)
• 2.5" drive or 3.5" drive in removable tray (Page 107)
• 2.5" drive or 3.5" drive in removable tray (with 5.25" mounting
frame) (Page 109)
• 5.25" drive or 5.25" component (Page 121)
• 1 x HDD inside on the side panel of the device (Page 121)
6.6 Installing and removing drives
Installation option
105