Siemens SIMATIC IPC547J Operating Instructions Manual page 124

Expanding and assigning parameters to the device
6.6 Installing and removing drives
2. Screw from outside the drive bay plate on the inside to the side panel of the enclosure, at
position ① or position ②. The SATA connections each lie in the middle ③.
3. Connect the SATA cables to the required SATA connectors of the motherboard and to the
drive (position ③).
4. Close the device.
5. Connect the power supply.
124
Operating Instructions, 01/2021, A5E43920357-AA