MEBx setting
User Consent
(only if "Manageability Feature
Selection" = Enabled)
Password Policy
(only if "Manageability Feature
Selection" = Enabled)
Network Setup
(only if "Manageability Feature
Selection" = Enabled)
Activate Network Access
(only if "Manageability Feature
Selection" = Enabled)
Unconfigure Network Access
(only if "Manageability Feature
Selection" = Enabled)
Remote Setup And Configuration
(only if "Manageability Feature
Selection" = Enabled)
Power Control
(only if "Manageability Feature
Selection" = Enabled)
MEBx Exit
Exiting MEBx. The changes are saved.
Further information
More information about MEBx can be found here: Intel® website (https://www.intel.com).
Operating Instructions, 01/2021, A5E43920357-AA
Meaning
User Consent settings.
Forces the following additional security behavior:
When a user attempts to establish a KVM connection remotely, a six-digit number is
displayed on the AMT PC. The remote user must enter this number on the help desk
PC before the KVM connection can be opened.
Password policy that specifies the conditions under which the password is
permitted to be changed remotely.
The following options can be selected:
•
Default Password Only
•
During Setup And Configuration
•
Anytime
The following network settings can be configured:
Intel(R) ME Network Name Settings
•
Host Name
•
Domain Name
•
Shared/Dedicated FQDN
•
Dynamic DNS Update
TCP/IP Settings > Wired LAN IPV4 Configuration
•
DHCP mode
Enables the network interface.
This MEBx setting is only available when the network is not enabled.
Disables the network interface and resets the network settings to their default
values.
Displays the current provisioning settings.
Specifies the power states (S0, S3, S4, S5) of the computer in which MEBx is
enabled.
Operating the device
5.6 Remote maintenance of the device
89