Table of Contents
Advertisement
Gear pedal adjustment (03_08)
The control levers have been ergonomically fitted when assembling the vehicle.
If necessary, the position of the levers can be personalised.
•
Rest the vehicle on its stand.
•
Partially undo the screw (1).
•
Turn the cam (2) until the adequate position for the pedal (3) is obtained.
•
Tighten the screw (1) and check the cam is stable in position.
CAUTION
03_08
TO ADJUST THE GEARSHIFT LEVER BACKLASH, PLEASE CONTACT AN OF-
FICIAL aprilia DEALER. IF YOU ARE ADEQUATELY TRAINED AND EXPERI-
ENCED, REFER TO THE INSTRUCTIONS IN THIS WORKSHOP BOOKLET
AVAILABLE ALSO AT ANY DEALER.
Running in
Running the engine in correctly is essential for ensuring engine longevity and func-
tionality. Twisty roads and gradients are ideal for running in the engine, brakes and
suspension effectively. Vary your riding speed during the running in period. This en-
sures that components operate in "loaded" conditions and then "unloaded" conditions,
allowing the engine components to cool.
CAUTION
THE FULL PERFORMANCE OF THE VEHICLE IS ONLY AVAILABLE AFTER THE
SERVICE AT THE END OF THE RUNNING IN PERIOD.
Follow the guidelines detailed below:
•
Do not fully open the throttle grip abruptly at low engine speeds, either during
or after the running in period.
58
Advertisement
Table of Contents
