Parameterization For End User - elco TRIGON L Operating Manual

Parameterization for End User

Adjustment for Individual End User
Requirements
If no buttons are pushed during an
approximate 8 minute time period, the
system automatically reverts backs to
the standard display. No changes are
being saved.
Button Description
1 Push one of the two line selector buttons. They take you
directly to the "End User" level.
2 Use one of the line selector buttons to advance to the
respective line. It is shown in display (1) as "Pxxx".
3 Set the desired values by using the plus or minus
button. The setting is saved as soon as you exit the
programming level or switch into another line. The
following parameter list displays all possible settings.
4 Push either one of these buttons to exit the "End User"
or programming level.
5 Push the information button to exit the programming level.
Any changed values are being saved.
en
23