Subscribe to Our Youtube Channel
Related Manuals for elco PISCES MINIFILL
Summary of Contents for elco PISCES MINIFILL
- Page 1 COMPACT, WALL MOUNTED, PRESSURISATION MANAGER INSTRUCTIONS FOR INSTALLATION, SERVICING & MAINTENANCE OF THE PISCES MINIFILL MODEL M1/1 (Mechanical Single Pump) Unit, L250-M1/1...
-
Page 2: General Notes
The unit shall not be left to operate without being correctly commissioned. Installation Requirements The installation of Pisces Minifill pressurisation manager shall be in accordance with the relevant requirements of all current Water Regulations, such as; Water Supply (Water Fittings) Regulations 1999 (Amended Dec 2000)’,... -
Page 3: Product Description
Wall/Floor mounted with compact dimensions At 600mm High, 382mm Wide, and 280mm Deep, the Pisces Minifill pressurisation managers allows for site installation where space is of a premium, without compromising serviceability. -
Page 4: Technical Data And Dimensions
Installation Template (part of the carton). To unpack the Pisces Minifill pressurisation manager, carefully cut along the taped seams of the carton. The carton will then un-fold to reveal the unit. Do not discard of the packaging as this can be used as a template to assist with the installation of the... - Page 5 7. The Pisces Minifill pressurisation manager should be carefully lifted so that the cutout on the rear of the Pisces Minifill unit is just above the mounting bracket, and then gently lowered to engage the bracket into the cutout. DO NOT lift the Pisces Minifill unit by any of the internal parts or components.
-
Page 6: Water Connections
See Fig 8.2 Fig 8.2 Electrical Connection The Pisces Minifill pressurisation manager is supplied with a fly lead for the Mains Power Connection; this cable should not be replaced. The appliance power supply, fused spur or fused plug socket, shall be positioned within 1 metre of the unit, See Fig 9.0. -
Page 7: Wiring Details
Earth Tag Mains Live Supply Earth 240v 50 Hz 10 amps Neutral Front Door Earth Tag Elco Heating Solutions Pisces Title. Version: 3 Juniper West, Fenton Way Drawn by: Southfields Business Park Jim Wyborn Drg Nr Minifill Wiring MHS 1.1... -
Page 8: Filling The System
11.1 Filling the System The Pisces Minifill Mechanical M1/1 pressurisation manager cannot be used to fill the system; however, the Pisces Minifill Electronic E1/1 and E1/2 pressurisation managers can be used to fill the system, as these appliances incorporate an Anti-Water Wastage program. - Page 9 Break Tank in small doses. Drain an amount of water from the system (at a position some distance from the Pisces Minifill pressurisation manager), so that the system pressure drops and the Treated Water in the Break Tank is introduced into the system.
-
Page 10: Fault Diagnosis
PISCES MECHANICAL M1/1 MINIFILL 12.1 First Fill and Setting to Work (cont’d) Open the Quarter Turn Isolation Valve on the underside of the Break Tank. Vent The Pump. Located on the top of the center pipe connection of the pump assembly, is a vent valve. Undo this vent valve with a Vent Key and release any air. - Page 11 PISCES MECHANICAL M1/1 MINIFILL 13.0 Fault Diagnosis (cont’d) Symptom Remedial Action • Pump Running, pressure Turn OFF Quarter Turn Isolation Valve on the Water Outlet, If not rising, but water input pressure rises and pumps turns OFF, System has a leak equal into Break Tank or greater than the appliance can replenish.
-
Page 12: Commissioning Form
PISCES MECHANICAL M1/1 MINIFILL 15.0 Commissioning Form The commissioning engineer should complete this section on the day of Setting Up the appliance; so that a record is kept of the settings made for future reference. ENGINEER: COMPANY: DATE: SERIAL NO: RESULTS SETTING System Static Height...
Need help?
Do you have a question about the PISCES MINIFILL and is the answer not in the manual?
Questions and answers