Advertisement
Step 16
Turn four SILVER 5/8" FLAT HEAD SCREWS (23S) halfway into the holes
å
in the PULL-OUT BACK (J3). Do not completely tighten the SCREWS.
Then, slide the OUTLET (1D) onto the heads of the SCREWS in the
å
PULL-OUT BACK (J3).
Insert the GROMMET (10P) into the large hole in the PULL-OUT
å
BACK (J3). Then, insert the GROMMET CAP (1P) into the GROMMET.
SILVER 5/8" FLAT HEAD SCREW
(4 used in this step)
1D
1P
23S
10P
J3
Page 21
Advertisement
