Teknik 5158097 Manual page 10

Step 5
Fasten the SHELF UPRIGHT (N) to the FIXED SHELF (D).
å
Use two BLACK 1-7/8" FLAT HEAD SCREWS (2S) as
shown in the upper diagram.
Fasten the RIGHT END (A) to the FIXED SHELF (D) and
å
BOTTOM (E). Tighten four TWIST-LOCK® FASTENERS as
shown in the lower diagram.
Fasten the RIGHT MOLDING (T) to the RIGHT END (A).
å
Use two BLACK 2" PAN HEAD SCREWS (66S).
E
Page 10
Finished edge
D
A
Finished edge
N
D
BLACK 1-7/8" FLAT HEAD SCREW
(2 used for the SHELF UPRIGHT)
T
66S
BLACK 2" PAN HEAD SCREW
(2 used for the RIGHT END)
Surface without
TWIST-LOCK®
FASTENERS
2S