Advertisement
Step 6
Fasten the TOP (C) to the SHELF UPRIGHT (N). Tighten the two TWIST-LOCK® FASTENERS in the
å
SHELF UPRIGHT.
Fasten the FRONT MOLDING (S) to the TOP (C). Use two SILVER 2" FLAT HEAD SCREWS (57S).
å
NOTE: Do not overtighten the SCREWS into the TOP.
å
Fasten the RIGHT and LEFT MOLDINGS (U and T) to the TOP (C). Use six BLACK 1-5/8" PAN
å
HEAD SCREWS (27S).
NOTE: Do not overtighten the SCREWS into the TOP.
å
BLACK 1-5/8" PAN HEAD SCREW
(6 used for the RIGHT and LEFT MOLDINGS)
27S
57S
SILVER 2" FLAT HEAD SCREW
(2 used for the FRONT MOLDING)
S u r
f a c
C
S
U
N
e w
i t h
h o l
e s
T
Unfi nished edge
Page 11
Advertisement
