Table of Contents
Advertisement
2.
Seat and fasten the batteries
on the column base, secure to
base using provided metal
straps.
3.
Connect the power cables to
batteries. ( Fig. 5)
4.
Install the battery covers back on lift.
NOTE: Ensure to correctly connect terminals: Red/Pos. = (+), Black/Neg. = (-)
STEP 4. Cable Reel Installation
1.
Take out the cable reels from the carton.
2.
Insert the holding frame into the base on the upper cover (Figs. 6a&b)
Fig. 6a
3.
Pull up and pull down the upper and down lock button, the reel can turn aside.
(Fig. 6c)
4.
Fix the reel on the base by the screw. (Fig 6d)
Fig. 6d
5.
Put the cable plug into the socket. (Fig 6e)
6.
Repeat the above steps for the other three columns
STEP 5. Pre-charging the batteries
If the newly installed batteries are not charged, please charge them before operation.
Charging steps refers to chapter 5.1 on page 23
Fig. 5 Battery Installation
Fig. 6b
Fig. 6e
8
Mar 2016
MSC-18K
Fig. 6c
Advertisement
Table of Contents
