IDEAL MSC-18K-B Manual page 14

5. Take care that the emergency stop button of each lifting column must been
released.
6. Operation description
All system functions are available by press the MODE buttons when the lift columns
are not in operation (non of button is pressed).
When the Mode is ALL / Vehicle ( II..II )
-Press one button will cause all columns moving.
When the Mode is WHEEL / Single ( I )
-Press one button will cause only that columns moving.
When the Mode is Axle / Pair ( II )
-Press anyone button will cause only that two columns in same axle moving.
Note: In WHEEL or AXLE mode, the lifting or lowering will be stopped when
the height difference between all columns or axles is greater than 2" (50
mm)
13
Mar 2016
MSC-18K