IDEAL MSC-18K-B Manual page 11

3.2 CONTROL PANEL DETAILS
1. EMERGENCY button
To stop movements (lifting or lowering) immediately.
2. POWER switch
Controls the power of the control panel or charging of the batteries.
3. '⇑ ⇑ ⇑ ⇑ ' ' ' ' ( UP ) button
Controls the lifting of the columns.
4. '⇓ ⇓ ⇓ ⇓ ' ' ' ' ( DOWN ) button
Controls the lowering of the columns.
5. '⇓ ⇓ ⇓ ⇓ ' ' ' ' ( PARK ) button
Controls the locking of the columns.
6. POWER light.
This light will go on when the control panel is power on.
7. 8. 9. 10. CURSOR buttons.
These buttons move cursor on the screen to edit items.
11. 12. 13. MODE buttons.
To select between the functions: "WHEEL", "AXLE" & "ALL"
14. BIAS button
To set the zero point of height in initialization.
15. START button
To start the running of the software.
16. SHIFT button.
This button is for the running of the program.
17. ENTER button
This button serves confirming of instruction or entering sub menu.
18. ESC button
Serves to enter or exit from menu; or from sub menu to upper lever menu.
19. LCD SCREEN
Display the height readings of columns & information
20. WARNING light
This light will go on when the EMERGENCY button is pressed.
21. CABLE port
This port is used for communication cable connection.
22. BATTERY indicator
This indicator shows the output voltage of the batteries.
23. HAND / REMOTE CONTROLLER port
The port is for hand/remote controller connection
10
Mar 2016
MSC-18K