IDEAL MSC-18K-B Manual page 13

3.4 DESCRIPTION OF THE MOBILE COLUMN LIFT SYSTEM
The mobile column lifts are designed in such a way as to offer maximum flexibility and
convenience. A lifting system can consist of 4 lifting columns. The control system is
equipped with the following features:
- Simultaneous operation of all lifting columns
- Operation of one lifting column.
- Operation of pair/axle lifting columns.
Each lifting column is provided with these control functions. But the RUNNING MODE
shall be settled by the MODE buttons on the main column control box first.
The mode of the mobile column lift is set-up as following:
1. Position the lifting columns as indicated in 4.3 (Fig. 8.)
2. Then turn on the battery power switch of each column on the side. (Fig.9a)
Fig. 9a
3. Set the control box power switch (Fig. 9b) on each sub column to left position (ON)
first, the green Power indicators will be on.
4. Then turn on the switch (Fig. 7b) on main column to left (ON) and the LCD screen is
lighted. Wait until the LCD screen changed to the 4th display, press the START
button to start running of the system.
TD 400C
Version 2.0.0.4
INITIALIZING...
LCD screen 1
TB-6 Controller V6.84MD
By KERNEL Right reserved
Sta.: RUN
Self Check...
?
○ ○ ○ ○
LCD screen 3
Note: If necessary, the lifting height / travel distance shall be changed before
press START button. (See 3.5 section next)
st
3 step DOWN
XX
rd
Mar 2016
MSC-18K
Fig.9b
Please wait...
LCD screen 2
TB-6 Controller V6.84MD
By KERNEL Right reserved
170cm 4 lift
Press START to confirm
?
○ ○ ○ ○
LCD screen 4
12
nd
Z___
th