Table of Contents
Advertisement
4.2 RAISING AND LOWERING ALL COLUMNS
Press UP or DOWN button to raise or lower the vehicle to desired height.
When the DOWN button is pressed, the columns will be raised up a little
distance, to unlock the mechanical lock, and then lower down.
Once desired height has been reached, it is recommended that the lift be
lowered into the mechanical locks by pressing PARK button.
Before begin to work under the vehicle, it is recommended to support the
vehicle with the safety stand before turning power switch to middle position
(OFF)
4.3 Explanation of message on LCD:
1. Slowing
Mode: II..II
L2 11
10
Slowing...
Column 2# or both 1# and 2#
difference is greater than 3/4" (20mm), the column(s) will be slowed down
automatically.
2. Suspending
Mode: II..II
L2 28
L1 28
Suspending...
Both column 1# and 2# are quick in rising or lowering. The height difference is
greater than 2" (50mm), the column will be suspended automatically.
3. Times and minutes
When in ALL mode, there are time and
min on the bottom line on the screen. It
shows from the beginning (software
installed) how many times the motors
have been started how long it worked for
pumping up the cylinder.
bias: Z___
10
0
10
0
are quick in rising or lowering, The height
bias: Z___
30
0
30
0
20
Mar 2016
MSC-18K
Mode: II..II
L2 54
L1 54
Slowing...
Or
Mode: II..II
L2 48
L1 46
Suspending...
Or
Mode: II..II
4
2
Reset!
51time 17min
bias: Z___
55
0
55
0
bias: Z___
47
0
46
0
bias: Z___
3
0
3
0
Advertisement
Table of Contents
