Add Visual Controls To Your Plc Program (Optional) - Panasonic MINAS A6 Multi Quick Start Manual

Position control with beckhoff host controller over ethercat

Hide thumbs Also See for MINAS A6 Multi:

Table of Contents

Add visual controls to your PLC program (optional)

To enhance your PLC program, you can add visual controls, e.g. a button to enable servo

control.

Go to "Solution Explorer" > "PLC" > "First_PLC_Project" > "First_PLC_Project Project".

Right-click on "VISUs" and select "Add" > "Visualization".

Select "VisuSymbols (System)" and then "Open".

QS10000_V1.0_EN

8 Add visual controls to your PLC program (optional)

Table of Contents