RC4600 ACU Board Set
Chapter 2
Hardware
2.1.2.2 Configuration Page
The main configuration page for the RC4600 is available by navigating a web browser to the IP address
of the controller /config (192.168.1.1/config). Upon entry to the configuration page, the System Summary
tab is selected by default.
The System Summary tab will provide you with the current software on the RC4600, as well as the serial
number for the controller. At the bottom of the window is a <Return> button. Clicking this button will
always return the user to the main page of the GUI (2.1.2.1).
Three additional tabs are available in addition to the System Summary. Each of these tabs is described
in detail in the sections below.
65