Table of Contents
Advertisement
RC4600 ACU Board Set
2.1.2.1.5.3 Locate
Chapter 1
The <Locate> button allows the user to enter the
LOCATE mode (2.1.1.2.2.3). After clicking the
<Locate> button, the user is presented with a list
of preset satellites. The list of satellites is the
set of satellites from the database that have the
same band as the current feed. Selecting one of
the satellites in the list will begin an automatic
locate (2.1.1.2.2.3.2).
Clicking the <Manual> button will present the
user with a box that allows them to type in the
details of the satellite they want to locate. After
entering the details, clicking the <Locate> button
will start an auto locate based on the data input.
57
Introduction
Advertisement
Table of Contents
