Table of Contents
Advertisement
RC4600 ACU Board Set
2.1.2.1.1
ACU Status Window
The ACU status window shows current information about the RC4600 and the last satellite located.
Any alarms that are currently present will also display in the ACU status window box. In the image below,
the standby alarm is displayed. Note that the box will also turn red when an alarm is present.
2.1.2.1.2
Antenna Position Display
The antenna position display at the bottom of the page shows the current status of the Azimuth, Elevation
and Polarization axis. The information is displayed both numerically and graphically. These positions are
updated continuously during all operations.
Targets for auto-moves are also displayed in the smaller boxes. In this case, the elevation target for the
last locate was 41.800. If the antenna was at a limit, the limit would show inside of the box as well.
Chapter 1
48
Introduction
Advertisement
Table of Contents
