Table of Contents
Advertisement
RC4600 ACU Board Set
2.1.2.1.5
Automatic Operations
Down the left side of the display eight boxes that provide various automatic operations for the RC4600.
Each of those functions are described in the corresponding section below.
2.1.2.1.5.1 Deploy
2.1.2.1.5.2 Stow
Chapter 1
The <Deploy> button automatically moves the antenna to the
predefined "deploy" position. Further discussion of the DEPLOY
mode can be found in section 2.1.1.2.2.1. Prior to entering the
DEPLOY mode, the RC4600 will confirm that you want to deploy
the antenna. Clicking <YES> will enter the DEPLOY mode.
Clicking <NO> will return the GUI to the main page. When the
deploy operation is finished, the RC4600 will exit DEPLOY mode,
and the ACU Status Window (2.1.2.1.1) will notify the user.
The <Stow> button automatically moves the antenna to the
predefined "stow" position. Further discussion of the STOW mode
can be found in section 2.1.1.2.2.2. Prior to entering the STOW
mode, the RC4600 will confirm that you want to stow the antenna.
Clicking <YES> will enter the STOW mode. Clicking <NO> will
return the GUI to the main page. When the stow operation is
finished, the RC4600 will exit STOW mode, and the ACU Status
Window (2.1.2.1.1) will notify the user.
56
Introduction
Advertisement
Table of Contents
