RC4600 ACU Board Set
2.1.2.1.5.4.2 Resume Track
If the satellite currently being selected for tracking has been tracked before, the user will be prompted
with the following screen.
Clicking <YES> will use the track table data, or TLE data that already exists for the satellite. If there is
data for the current time, the RC4600 will position the antenna to the appropriate angles automatically. If
there is not data for the current time, the RC4600 will perform a Peak Up (2.1.1.2.2.3.4) using the track
source and then begin the track.
Clicking <NO> will return the user to the main page.
2.1.2.1.5.5 Peak Up
Chapter 1
The <Peak Up> button immediately performs a Peak Up
(2.1.1.2.2.3.4) using the currently selected signal source.
59
Introduction