Table of Contents
Advertisement
RC4600 ACU Board Set
2.1.1 Front Panel Software Operation
2.1.1.1 Front Panel Software Overview
2.1.1.1.1
Modes
The functionality of the RC4600 is achieved by placing the controller in the desired mode of operation.
The diagram below shows the hierarchy of the RC4600's modes. Each mode has a unique display
screen that presents the information applicable to that mode's operation.
Transition between groups by holding down the MODE key for 5 seconds
OPERATING GROUP
Transition between modes by pressing the
MODE key
MANUAL
2.1.1.2.1
After initial pairing of an RC4600 to an antenna, the programming modes will typically not be used.
Section 2.1.1.2 will give further details on the operating modes. The rest of section 2.1.1 introduces
common elements of all modes.
Chapter 1
MENU
2.1.1.2.2
DEPLOY
2.1.1.2.2.1
STOW
2.1.1.2.2.2
LOCATE
2.1.1.2.2.3
TRACK
2.1.1.2.2.4
POSITION
2.1.1.2.2.5
MOVETO
2.1.1.2.2.6
STANDBY
2.1.1.2.2.7
PEAKUP
2.1.1.2.2.8
PROGRAMMING GROUP
Transition between modes by pressing the
MODE key
17
Introduction
Advertisement
Table of Contents
