Table of Contents
Advertisement
RC4600 ACU Board Set
Chapter 1
Introduction
2.1.2.1.3
Local Jog Control
The bottom right side of the main page provides a keypad for manual jog control of the antenna. The
keys provide the ability to jog the antenna in azimuth, elevation, and polarization. It also provides the
ability to move to the preset H and V positions, as well as providing the ability to move the feed a preset
90° to cross pol.
The keypad also provides the ability to change the speed via a Fast/Slow button. The button will always
highlight the speed that the next jog is going use. In the image below, the next jog is set for Fast speed.
The keypad also provides a <STOP> key. This key can be used during any automatic movement to stop
the current operation.
51
Advertisement
Table of Contents
