Main Display Window; Satellite Arc Display - RESEARCH CONCEPTS RC4600 Operator's Manual

Servo antenna controller board set
Table of Contents

Advertisement

RC4600 ACU Board Set
Chapter 1
Introduction
2.1.2.1.4

Main Display Window

The center section of the display can be used for multiple functions. These include displaying the satellite
arc, spectrum analyzer display, tracking diagnostics, and many additional antenna specific functions.

2.1.2.1.4.1 Satellite Arc Display

The center section of the display is used to display the satellite arc of the current satellites in the satellite
database (2.1.2.2.1).
The preset satellites shown will be specific to the current band the RC4600 is configured to use. In the
window above, the RC4600 is set for a Ka-Band feed. Since only three preset satellites are configured
for Ka-Band, only 3 are shown.
When 'hovering" over a satellite with a mouse, information for that satellite preset will be displayed in the
upper portion of the window as shown below. Clicking on a satellite will start a LOCATE automatic
movement as described in section 2.1.1.2.2.3.2.
52

Advertisement

Table of Contents
loading

Table of Contents