Network Connection - Axis 7100 User Manual

Troubleshooting
142
Error Conditions
Status Indicator Off
Network Indicator Off
This table lists a summary of error conditions:
Event Status
LED
Power up On
Off
Idle On
Error in FLASH Yellow
PROM
Flash
Error in Red
DRAM/DIMM
Flash
DRAM/DIMM Flash
configuration
error
SW-HW Red
combination error
Flash
Illegal serial no. Red
Flash
Yellow
Flash load failed
Flash
The Status indicator remains off if a problem with the scanning
device communication has occurred. The AXIS 7100 message
display may additionally provide error status information.
The Network indicator flashes when there is network traffic. If it
remains off and you know there is network activity, check the

network connection.

AXIS 7100 User's Manual
Busy Network Remarks
LED LED
Off Off Check parallel cable to the
WORKiO copier
Off Off Check RJ45 cable to network
Off Off Check RJ45 cable to network. If
known network traffic, the Net-
work LED should flash.
Off Flash Consult Network Administrator
Off Off Consult Network Administrator
Flash Off Consult Network Administrator
Flash Flash Consult Network Administrator
Flash Flash Consult Network Administrator
Off Off Consult Network Administrator