Table of Contents
Advertisement
3.9.2
Preparations
1. Select [System]→[Communication]→[Network] from the menu and check the IP
address of the FCV-30 transceiver unit.
2. Change the IP address of the PC to an IP address that can connect to the trans-
ceiver unit of the FCV-30. Only change the last octet of the IP address confirmed
in step 1. (For example, if the IP address of the FCV-30 transceiver unit is
"192.168.2.9", set the IP address of the PC to "192.168.2.100".) The default IP ad-
dress of the FCV-30 transceiver unit is "192.168.2.9".
3.9.3
How to change the IP address
For a PC using Windows
1. Click the Windows
dows System Tools]→[Control Panel].
2. Click [Network and Sharing Center].
3. Click [Change adapter settings].
4. Right-click [Wi-Fi] or [Ethernet], and then select [Properties].
5. Select [Internet Protocol Version 4 (TCP/IP v4)], and then click [Properties].
6. Select [Use the following IP address:], change the IP address, and then click [OK].
7. Reboot the PC.
3.9.4
How to use the IP address changing tool
1. Connect the PC to the FCV-30 transceiver unit with a LAN cable.
2. Start the IP address changing tool on the PC. The PC receives the IP address
from the transceiver unit automatically, and then displays the following windows.
Note: If it fails to receive the IP address, check the IP address of the PC and the
LAN connection for errors.
®
10, set the IP address as follows.
®
mark at the bottom left of the screen, and then select [Win-
3. INITIAL SETTINGS
3-21
Advertisement
Table of Contents
